EVCA-AP-S

Description

The EVCA-AP-S Strobe Series provides a wide rangeof candela light output options in a single device. The candela settings include a 12 or 24 volt DC operation for the 15, 35 and 60 (75 on axis) candela settings and 24 volt DC operation for the 15, 35, 60, 75, 95 and 110 candela settings. The candela setting is displayed through the front window and is selectable using a drum wheel. The voltage input can be either regulated DC or full wave rectified (FWR) 12 volt or 24 volt operation with an operating range from 8 to 33 V DC. The strobes can be synchronized using a control panel with the an EVCA-AP-SMD10 sync module. The EVCA-AP-S utilizes a universal mounting plate that will mount on a single gang, double gang, octagon and 4” square electrical boxes. The back plate allows the installer to mount the plate and connect the wire connections. The strobe attaches in a hinge fashion from the top and is secured by a single mounting screw. The strobe completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look.

Features

  • UL listed
  • 12 VDC with 15, 35 or 60 cd settings
  • 24 VDC with 15, 35, 60, 75, 95 or 110 cd settings
  • 6 distinct candela settings
  • Candela selection view window
  • Pre-wire back plate
  • Universal back plate mounting (single gang, double gang, octagon, or 4” square)
  • Single screw mounting
  • For indoor applications

Comments are closed